A4 Sedan L4-2.0L Turbo (BPG) (2005)
-
Before installing Transmission Control Module (TCM) J217 , coat new O-rings -A- on hydraulic control module with ATF.
-
Install Transmission Control Module (TCM) J217 without canting it.
^
Harness connectors -A- , -B- and -C- on rear side of control module must engage on hydraulic control module.
-
Tighten bolts -arrows-.
-
Install end cover.
After connecting Transmission Control Module (TCM) J217 , the following steps must be performed:
^
Complete coding for new Transmission Control Module (TCM) J217.
^
Perform adaptation for Transmission Control Module (TCM) J217.
Use Vehicle Diagnosis, Testing and Information System VAS 5051 for this.