A4 Sedan L4-2.0L Turbo (BPG) (2005)
Note:
-
To ensure a secure fit, the clutch pedal starter interlock switch F194 must not be installed more than once.
Removing
-
Remove storage compartment on drivers side.
-
Disconnect electrical connector -3- on clutch pedal starter interlock switch.
-
Press clutch pedal -1- all the way down and hold it in this position.
-
At the same time, release clutch pedal starter interlock switch -2- by turning it 45° in the direction indicated -arrow- and pull it out of the guide.
Installing
-
Pull out operating rod -arrow- all the way before installing clutch pedal switch.