A4 Sedan L4-2.0L Turbo (BPG) (2005)
Clutch Master Cylinder: Service and Repair
Master Cylinder, Removing and Installing
Master cylinder, removing and installing, 01X, 6 Spd. M/T FWD
Special tools, testers and auxiliary items required
Hose clamp 3094
Spark plug connector pliers V.A.G.1922
Removing
Observe the notes on removing and installing master cylinder and slave cylinder.
CAUTION:
^
Follow steps required when disconnecting battery.
-
Pull off rubber seal on plenum chamber in direction of - arrow-
-
Remove cover - 1 - from plenum chamber.
-
With ignition switched off, disconnect battery Ground (GND) strap.