audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

Notes on Removing and Installing Master Cylinder and Slave Cylinder|Page 8115 > < Notes on Removing and Installing Master Cylinder and Slave Cylinder|Page 8113
Page 2
background image

-

Use screwdriver to pry off the two caps - 3 -.

-

Remove nuts - 4 - and detach the two wiper arms - 2 -.

-

Pull off clips - 1 - and detach cowl panel grille - 5 -.

Take the electronics box out of the plenum chamber as follows:
-

Remove bolts - arrows - and take off cover.

-

Use screwdriver to carefully pry off retaining strap - arrow -.

-

Lay aside engine control module with connectors attached.

-

Disconnect connectors - 2 - at console.

-

Disconnect electrical wiring connection - 1 -.

Notes on Removing and Installing Master Cylinder and Slave Cylinder|Page 8115 > < Notes on Removing and Installing Master Cylinder and Slave Cylinder|Page 8113