audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

Notes on Removing and Installing Master Cylinder and Slave Cylinder|Page 8128 > < Notes on Removing and Installing Master Cylinder and Slave Cylinder|Page 8126
Page 4
background image

Pulling oil seal out of guide sleeve

A - Counter-support, e.g. Kukko 22/1
B - Internal puller 23.5 ... 30 mm, e.g. Kukko 21/4

Pressing oil seal into guide sleeve (press in onto stop)

Note:  
^

The open side of seal faces toward thrust tube VW 454.

Notes on Removing and Installing Master Cylinder and Slave Cylinder|Page 8128 > < Notes on Removing and Installing Master Cylinder and Slave Cylinder|Page 8126