A4 Sedan L4-2.0L Turbo (BPG) (2005)
/Page-2873002.png)
-
Place SAC pressure plate onto thrust disc so that only 3 bolt heads - arrows - make contact.
-
Position thrust pad 3062 in center of pressure plate.
Do not use force when performing the following steps, as this could cause the forks on the adjuster ring to break Off.
-
Apply two screwdrivers to forks on adjuster ring. Use thrust disc to apply pressure to pressure plate until it is just possible to move adjuster ring.
-
Using two screwdrivers, turn back adjuster ring evenly in direction of - arrows - until it reaches stop.
-
Hold adjuster ring against stop and reduce pressure applied by thrust disc so that the adjuster ring is held in this position.
