A4 Sedan L4-2.0L Turbo (BPG) (2005)
/Page-2861001.png)
Pressure Plate: Specifications
Conventional Clutch
Conventional clutch, servicing, 01X, 6 Spd. M/T FWD
1 - Flywheel/dual mass flywheel
2 - Bolt for flywheel
^
Always replace
^
Bolt length: 22.5 mm; 60 Nm plus an additional 90° 1/4 turn
^
Bolt length: 43 mm; 60 Nm plus an additional 180° 1/2 turn
3 - Clutch plate
^
Installation position: Clutch lining must make full contact with flywheel
^
The marking "Getriebeseite" (if provided) faces pressure plate/transmission.
^
Coil springs (damper assembly) point toward pressure plate and transmission
4 - Pressure plate
5 - Bolt, 22 Nm
^
Loosen and tighten gradually in several stages and in diagonal sequence
