A4 Sedan L4-2.0L Turbo (BPG) (2005)
-
Remove bolts - 1 to 6 - to remove front crossmember for vehicle floor.
Note:
^
Illustration shows vehicle with 4-Cyl. engine.
Note:
^
The flex pipe in the front exhaust pipe must not be bent more than 10°, otherwise it can be damaged.
-
Disconnect exhaust system at double clamp - arrows -.
Note:
^
Illustration shows vehicle with 4-cyl. engine.
-
Remove heat shield below shift mechanism.
-
Remove lower cover from shift mechanism - arrows -.
-
Remove selector lever cable boot from lower cover and slide back.