A4 Sedan L4-2.0L Turbo (BPG) (2005)
Valve Body: Locations
Hydraulic control assembly, 01J, CVT A/T FWD
^
Location: Hydraulic control module is bolted to rear end of transmission. The Transmission Control Module (TCM) J217 is bolted directly to
hydraulic control assembly.
A - Harness connector for Automatic Transmission Pressure Regulating Valve 1 N215
B - Harness connector for Automatic Transmission Pressure Regulating Valve 2 N216
C - Harness connector for Solenoid Valve 1 N88
The hydraulic control assembly contains the following valves (not shown in illustration)
^
Automatic Transmission Pressure Regulating Valve 1 N215 (clutch solenoid valve)
^
Automatic Transmission Pressure Regulating Valve 2 N216 (solenoid valve gear)
^
Solenoid Valve 1 N88 (clutch cooling/safety shut-off)
^
Clutch cooling valve
^
Minimum pressure valve
^
Pressure relief valve
^
Clutch control valve
^
Pressure control valve
Note:
^
Valves are monitored via On-Board Diagnostic (OBD).
^
Description and functions of individual valves 951103 Continuously Variable Automatic Transmission Multitronic 01J.