A4 Sedan L4-2.0L Turbo (BPG) (2005)
^
When inserting, ensure that the wide spacing - a - on the joint body is aligned with the narrow spacing - b - on the hub after swivelling in.
^
Chamfer on internal diameter of ball hub (splines) must face drive shaft.
-
Swivel the hub into the joint body; at the same time the hub must be swivelled out of the cage - arrows - far enough to allow the balls to fit into the
ball tracks.
-
Swivel in the hub with balls by applying firm pressure on the cage - arrow -.
Checking function of constant velocity joint:
The constant velocity joint has been correctly assembled if the ball hub can be moved by hand backwards and forwards over its entire axial adjustment
range.