audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

Seals and Gaskets, M/T > < Fluid - M/T|Capacity Specifications|Page 8708
Page 2
background image

Note the following when filling with new oil:
-

Remove oil filler plug - arrow -.

-

Fill with gear oil up to edge of housing - arrow -.

-

Install oil filler plug.

-

Start engine, engage a gear and allow transmission to turn for approximately 2 minutes.

-

Switch off engine and remove oil filler plug.
Once more, fill with gear oil up to edge of housing - arrow -.

-

Screw in oil filler plug and tighten.

Tightening Torque

Seals and Gaskets, M/T > < Fluid - M/T|Capacity Specifications|Page 8708