audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Selector Shaft Oil Seal, Replacing With Transmission Removed (Transmission Remains Assembled)|Page 8715 > < Selector Shaft Oil Seal, Replacing With Transmission Removed (Transmission Remains Assembled)

A4 Sedan L4-2.0L Turbo (BPG) (2005)

Page 2
background image

^

With selector shaft removed

-

Carefully pry out oil seal using a screwdriver or oil seal extractor lever VW 681.

Installing

-

To avoid damaging oil seal - C -, oil seal and selector shaft must only be installed using assembly sleeve 01E311120 - A -.

-

Pack space between sealing lip and dust lip half full with sealing grease G052128A1.

-

Lightly oil outer circumference of seal.

-

Drive oil seal - arrow - into housing as far as it will go.

Selector Shaft Oil Seal, Replacing With Transmission Removed (Transmission Remains Assembled)|Page 8715 > < Selector Shaft Oil Seal, Replacing With Transmission Removed (Transmission Remains Assembled)