A4 Sedan L4-2.0L Turbo (BPG) (2005)
/Page-3060002.png)
Removing
-
If installed, loosen quick release fasteners - 3 - and remove rear sound insulation - B -.
Vehicles with 6-cylinder engine:
-
Remove heat shield for drive shaft (left-side).
-
Disconnect exhaust system at clamp (left-side) - left arrow -
-
Remove front exhaust pipe (left-side) with catalytic converter.
Continued for all vehicles:
-
Remove nut - arrow - and detach selector shaft lever from selector shaft.
-
Carefully pry out oil seal, making sure shaft is not damaged.
