A4 Sedan L4-2.0L Turbo (BPG) (2005)
Control Module: Service and Repair
Internal Components
Transmission Control Module (TCM) J217 , removing and installing - 01J, Continuously Variable Transmission (CVT)
Note:
^
Observe general repair notes.
^
Refer to Rules of cleanliness for working on automatic transmissions.
Removing
The Transmission Control Module (TCM) J217 can be removed with transmission installed.
-
Remove end cover.
-
Remove bolts -arrows- and pull out Transmission Control Module (TCM) J217 without tilting it.
-
Remove twin lip oil seal -A- from Transmission Control Module (TCM) J217.
Note:
^
When positioning Transmission Control Module (TCM) J217 , ensure sensor on control module is not damaged.
Installing
Install in reverse order of removal, note the following:
Note:
^
Replace gaskets and O-rings.
-
If necessary, clean sensors -A- , -C- and -D- of soiling and metal shavings.
-
Clean selector shaft.