A4 Sedan V6-2.8L (AFC) (1996)
Hood Latch Release Cable: Service and Repair
Hood Lock Cable, Removing And Installing
1
-
Grommet
2
-
Hood lock cable
Removing:
-
Remove storage compartment on driver's side.
-
Remove bolts - 3 -.
-
Detach cable - 2 - at support - 6 - and disengage from attachment point - A -.
-
Remove cable - 2 - from guide channel in seal - 4 - and pull cable through bulkhead into interior of vehicle.
Installing:
-
Install in reverse order of removal.
3
-
Hood lock release
4
-
Seal
5
-
Bolt
-
Qty: 2
-
4 Nm (35 in.lb)