A4 Sedan V6-2.8L (AFC) (1996)
Installing:
-
Install door seals.
-
Slide molded headliner in on passenger-side and insert in retaining strip at rear window.
-
Carefully push molded headliner over door seal (to secure molded headliner).
-
Remainder of installation is the reverse of removal
8
-
Clip(12x)
9
-
Rear grip handle (2x)
-
Pull grip handle open.
-
Remove cap.
-
Remove bolts - 11 -.
10
-
Front grip handle (2x)
-
Pull grip handle open.
-
Remove cap.
-
Remove bolts - 11 -.
11
-
Bolts (2x)
-
2.5 Nm (22 in.lb)
Fig. 1 Removing and installing cover for molded headliner cutout
-
Pull cover - 1 - down in direction of arrow, unclip and remove toward front.