A4 Sedan V6-2.8L (AFC) (1996)
Air Door Actuator / Motor: Service and Repair
Central Air Flap Motor -V70- Remove and Install
Central Air Flap Motor -V70-, Removing and Installing
-
Remove footwell air outlet.
-
Remove 3 screws -A-.
-
Separate electrical connection to flap motor ("blue" connector housing).
-
Release relay lever -B- and remove flap motor.
-
Install in reverse order of removal.
NOTE:
-
After installing, always check DTC memory.
-
When installing flap motor, ensure that relay lever -B- is correctly positioned.
-
Testing -V70-, output Diagnostic Test Mode (DTM).
-
Electrical test.