A4 Sedan V6-2.8L (AFC) (1996)
/Page-984002.png)
-
Install camshaft holder, tool # 3243 or equivalent.
Note: Camshaft holder # 3243 sets the cams in time with each other. There are no reference marks on the camshaft sprocket because the sprockets
are taper fit to the cams and do not use a keyway or pin for location.
-
Loosen bolts of left and right camshaft sprockets approx. 3 turns.
^
Do NOT remove bolts completely.
-
Remove camshaft holder.
-
Loosen camshaft sprockets from tapered ends of camshaft using appropriate puller.
^
Use KUKKO 21-10 or equivalent if engine is removed.
^
Use puller 3032 or equivalent if engine is installed.
-
Loosen camshaft belt tensioner.
-
Remove camshaft belt.
