A4 Sedan V6-2.8L (AFC) (1996)
-
After installing, check continuity between metal ring on fuel filler neck and chassis Ground using multimeter, specified value: approx. 0
Ohms
7
-
Protector plate
-
For fuel filler neck
-
With Ground connection
-
Ensure Ground screw is tight before threading in mounting screw
8
-
O-rings
-
Replace
9
-
Bleed valve
-
Removing, installing, checking See Fig. 1.
Fig. 1 Bleed valve removing, installing, checking
-
To remove, unclip valve from side of filler neck.
-
Lever in rest position: Valve closed
-
Lever pressed in direction of arrow: Valve open