A4 Sedan V6-2.8L (AFC) (1996)
-
When installing, turn the cover flange in direction of arrow as shown in illustration.
-
Connect the return line inside on the cover flange.
NOTE:
-
Always use new O-rings.
-
Lubricate O-rings with fuel or coat with a lubricant.
-
Place the new gasket (dry) for the cover flange into the opening of the fuel tank.
-
Wrap sender for fuel gauge -G wiring once around the supply line (in fuel tank) and install on cover flange.
-
Connect cover flange to fuel tank
-
Installation for vehicles with Front-Wheel Drive: -arrow 2- must be opposite -arrow 3-.
NOTE: -Arrow 1- applies to vehicles with All-Wheel Drive (Not applicable).