A4 Sedan V6-2.8L (AFC) (1996)
Throttle Cable/Linkage: Adjustments
Accelerator Pedal Cable, Adjusting Cautions & Notes
CAUTION!
-
The accelerator pedal cable is easily damaged (kinked) and therefore must be handled carefully.
-
A single slight kink can lead to cable failure while the vehicle is being driven.
-
A KINKED CABLE MUST NOT BE INSTALLED.
-
When installing the cable, make sure that it is aligned between its supporting mounts and the attachment points.
-
Pull off cable locking plate at throttle body.
-
Depress accelerator pedal to wide open throttle position.
NOTE: A second person is required for this step.
Vehicles with manual transmission
-
Pull cable sleeve away from cam at throttle body until throttle valve has opened fully, then hold tight in this position.
Vehicles with automatic transmission
-
Pull cable sleeve back toward wide open throttle position until throttle valve is fully open and kickdown switch is actuated (clicks), then hold tight
in this position.
-
Insert securing clip for cable sleeve.
-
Release accelerator pedal.
NOTE: After adjusting the cable, check idle speed and check the wide open throttle stop at the throttle valve