A4 Sedan V6-2.8L (AFC) (1996)
/Page-4082005.png)
Note: Large inner diameter of wheel bearing faces toward wheel hub.
Fig. 8 Pressing wheel bearing into 85 mm diameter wheel bearing housing
Note: Large inner diameter of wheel bearing faces toward wheel hub.
Fig. 9 Pressing wheel hub into 75 mm diameter wheel bearing
CAUTION:
-
When installing) VW519 sleeve must exert force only against the bearing inner race.
-
Make sure that the wheel bearing housing does not exert farce against the wheel hub. Otherwise there is the risk of damaging the wheel bearing.
-
The wheel bearing housing must remain as horizontal as possible when pressing in the hub. Otherwise the wheel hub will cant in the wheel bearing
, which will lead to early wheel bearing damage.
Fig. 10 Pressing wheel hub into 85 mm wheel bearing
