1996 Audi A4 Sedan V6-28L Rear Suspension Strut Service
-
Make sure that ends of springs lie against stops.
-
Secure locking lever in position.
-
Tighten self-locking nut using 3379 socket wrench insert and 3079 counter holder.
Tightening torque: 25 Nm (18 ft. lbs.)
-
Turn lower spring base and spring retainer as necessary so that end of spring contacts stop.
CAUTION: Do not damage the surface of the spring when driving on the lower spring base -19- and the spring retainer -18-.
-
Carefully release compressed coil spring.
-
Make sure that coil spring and upper and lower spring retainers are correctly positioned.
-
Remove VAG1752/1 spring compressor after it is free.
-
Unbolt VAG1752/8 adjustment gauge for struts and remove.
-
Remove suspension strut from VAG1752/2 spring mounting tool.