A4 Sedan V6-2.8L (AFC) (1996)
Transmission Mount: Service and Repair
NOTE:
^
If both transmission supports are removed, the transmission must be supported as described.
^
If only one of the transmission supports is removed, it is not necessary to additionally support the transmission.
-
Align transmission support 3282 with adjustment plate 3282/19 in order to support transmission 01V and mount on jack VAG 1383 A.
NOTE:
^
The symbols on the adjustment plate indicate the mounts required for the automatic transmission 01V; the arrow points in direction of travel.
^
The transmission can be supported alternatively with the jack VAG 1383 A and the relevant plate 1359/2.
-
Support transmission from below with jack VAG 1383 A and transmission support 3282.
NOTE: The automatic transmission 01V with all-wheel drive is supported at the same locations as the front-wheel drive version.
-
Remove shield.
-
Remove right transmission support (arrow in illustration).
-
Remove shield.