audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

Transmission Control Systems > < Differential, Transfer Case|Testing and Inspection|Page 8983
Page 1
background image

Fluid - Transfer Case: Testing and Inspection

-

Separate right catalyst from rear exhaust system and move it toward right side, refer to Exhaust System.

-

Remove filler plug -arrow B-.

The fluid level must be up to lower edge of filler opening.

-

If necessary top up with suitable synthetic 75W90 API GL5 gear oil.

NOTE:  Always replace filler plug.

-

Tighten the 18 mm filler plug in differential to: 35 Nm (26 ft lb)

Transmission Control Systems > < Differential, Transfer Case|Testing and Inspection|Page 8983