A4 Sedan V6-3.2L (BKH) (2007)
-
Remove tunnel crossmember
Installing
-
Tighten combi-bolt - 1 - to 110 Nm plus an additional 90° turn.
Use new washer and bolt.
-
Tighten combi-bolt - 2 - to 65 Nm.
-
Tighten nuts - arrows - to 23 Nm.
-
Remove tunnel crossmember
Installing
-
Tighten combi-bolt - 1 - to 110 Nm plus an additional 90° turn.
Use new washer and bolt.
-
Tighten combi-bolt - 2 - to 65 Nm.
-
Tighten nuts - arrows - to 23 Nm.