A4 Sedan V6-3.2L (BKH) (2007)
/Page-4080004.png)
-
Remove the driveshaft from rear final drive.
-
Secure driveshaft to body with wire.
-
Disengage parking brake cable at fuel tank.
-
Remove bolts - 2 - and remove shock absorber.
-
Remove brake disc and brake disc cover.
Continuation for all vehicles
-
Position Engine/Transmission Jack (V.A.G 1383 A) with Universal Transmission Support (V.A.G 1359/2 ) and a corresponding wooden block at
subframe or final drive (Fig. for vehicles with front wheel drive).
-
Tighten band around subframe or final drive.
CAUTION!
Before LOOSENING subframe bolts, secure vehicle against tipping over (e.g. load luggage compartment with approximately 50 kg).
