A4 Sedan V6-3.2L (BKH) (2007)
Scuff Plate: Service and Repair
Rear Cross Panel Trim, Removing and Installing
Rear Cross Panel Trim, Removing And Installing
Special tools, testers and auxiliary items required
-
Torque wrench V.A.G 1410
1
-
Rear cross panel trim
-
Removal:
-
Remove floor covering from luggage compartment.
-
Loosen two nuts - 2 - on rear cross panel trim - 1 - behind spare wheel and remove nuts.
-
Remove luggage compartment lighting connector.
-
Unclip rear cross panel trim - 1 - upward from four metal clips - 3 -.
-
Installing:
Installation is reverse of removal. Observe the following when doing so: