A4 Sedan V6-3.2L (BKH) (2007)
‹› Bolt onto pedal bracket.
7 - Bolt, 25 Nm
‹› Tighten in vehicle after brake booster has been installed.
8 - Brake light switch
‹› Removing and installing, refer to => [ Brake Lamp Switch ] See: Lighting and Horns/Brake Light Switch/Service and Repair.
9 - Clutch switch
10 - Bolts, 5 Nm
‹› Must engage in recess of pin.
‹› Do not tighten bolt until retaining clips have been installed.
11 - Bolt, 20 Nm
‹› Always replace.
12 - Brake pedal
‹› Install pin.
‹› Engage brake pedal in brake booster (you should hear it click into place).
13 - Master cylinder
‹› Seal must not be removed.
14 - Spring
‹› White spring mounting to pedal bracket, black spring mounting to clutch pedal
15 - Retainer
16 - Clutch pedal
‹› Secured by adjusting clutch master cylinder.
‹› Push onto pin.
17 - Pin
‹› Install pedal bracket onto pin.