A4 Sedan V6-3.2L (BKH) (2007)
Installing
-
The surface of the piston and seal should be cleaned using only methylated spirits and then dried.
-
Apply a thin coat of lithium grease (G 052 150 A2) to the piston and seal before inserting.
-
Place a protective seal with outer sealing lip on piston.
-
Using trim removal wedge (3409), insert inner sealing lip into the cylinder groove.
‹› When doing this hold the piston in front of the caliper housing.
-
Press the piston into the brake caliper housing using piston resetting tool (T10145).