A4 Sedan V6-3.2L (BKH) (2007)
Note:
^
If display screen remains blank: Operating instructions for scan tool
-
Switch ignition on.
-
Switch on scan tool printer by pressing Print button. Indicator lamp in button must come on.
-
Press button 1 for "Rapid data transfer".
If the following is indicated on display:
Note:
^
Address word 00 starts the automatic test sequence, i.e. the fault memories of all vehicle systems with self-diagnosis capability are interrogated by
way of rapid data transfer.
-
Enter "01" for the address word "Engine electronics" and confirm your entry by pressing the Q button.
The scan tool V.A.G 1551 will display the control unit identification details, for example:
Note:
^
The control module identification can be printed out by pressing the PRINT button on the scan tool V.A.G 1551.
Control module identification (example)
Control Module Identification (Example)