A4 Sedan V6-3.2L (BKH) (2007)
/Page-985003.png)
12 Stud bolt, 16 Nm
13 - Gasket
^
Replace
14 - Seal with Ground (GND) wire
^
Replace
Sealing ring on cap, replacing
-
Remove sealing ring at pull tab - arrow A - from cap - 1 -.
-
Insert new sealing ring - 2 with semicircular profile in groove - arrow B - on cap.
^
The pull tab - arrow A - must face up.
O-ring, inserting on oil filter housing
-
Insert O-ring - 2 - in groove - arrow - on oil filter housing - 1 -.
