A4 Sedan V6-3.2L (BKH) (2007)
-
Remove bracket for refrigerant lines at right on oil pan - arrow -.
-
Unfasten left and right stabilizer bar mountings - 1 - and - 2 -.
-
Pivot stabilizer bar downward.
-
Disconnect electrical connector - 1 - to Oil Level Thermal Sensor (G266) - arrow - and free up lines.
-
Remove bolts - 2 - for lower section of the oil pan.
-
Carefully loosen metal lower section of the oil pan from the bond without bending it.