A4 Sedan V6-3.2L (BKH) (2007)
Intake Manifold: Locations
Intake Manifold Lower-Part, Component Overview
Intake Manifold Lower-Part, Component Overview
1
-
Intake manifold lower part
-
After installation, adapt both intake manifold runner position sensors in operating mode "Guided Fault-Finding" in "Adapting intake
manifold runner position sensor"
2
-
Fuel rail
3
-
Fuel Pressure Sensor G247
4
-
High-pressure lines
CAUTION:
-
Before opening high pressure components of the fuel injection system, pressure must be relieved to residual pressure.
-
Then wrap a clean rag around the connection and relieve residual pressure by carefully loosening the connection.
-
Do not change bend shape
-
Tighten high-pressure lines
5
-
10 Nm
6
-
Sleeve
7
-
10 Nm
8
-
2.5 Nm
9
-
10 Nm
10
-
Retaining bracket for fuel rail
11
-
Vacuum actuator for intake manifold runner control
12
-
Vacuum hose
-
To Intake Manifold Runner Control (IMRC) Valve N316
13
-
2.5 Nm
14
-
Intake Manifold Runner Position Sensor
-
Left Intake Manifold Runner Position Sensor 2 G512 , right Intake Manifold Runner Position Sensor G336
15
-
2.5 Nm
16
-
Seal
-
Replace if damaged