A4 Sedan V6-3.2L (BKH) (2007)
/Page-1005002.png)
-
Remove sealing flange on belt pulley side.
‹› Replace ribbed belt side sealing flange.
CAUTION!
Make sure that no sealant residue enters the engine.
CAUTION!
Wear safety glasses.
-
Remove any sealant residue remaining on the cylinder block and the upper part of the oil pan; use a rotating plastic brush, for example.
-
Clean sealing surfaces so they are completely free of any oil or grease.
-
Cut tube nozzle at front marking (jet dia. approximately 1.5 mm).
