A4 Sedan V6-3.2L (BKH) (2007)
‹› Both camshaft adjusters must be able to still be rotated on camshaft and must not tip.
-
Remove Locking Pin (T40071).
-
Set counter-holder (T10172) with pin (T10172/2) in place on camshaft adjuster of left intake camshaft.
-
Hold camshaft timing chain pretensioned by pressing on counter-holder in direction of - arrow -.
-
Simultaneously, pre-torque camshaft bolt using multipoint socket (T10035) and torque wrench.
‹› Tightening Specifications 40 Nm.
-
Continue holding pretension on intake camshaft and pre-torque bolt - 1 - on the exhaust camshaft.
‹› Tightening Specifications 40 Nm.
-
Tighten camshaft bolts - 1 - and - 2 - on left cylinder head to final torque specification.