A4 Sedan V6-3.2L (BKH) (2007)
/Page-1032002.png)
-
Remove lower timing chain cover. Refer to => [ Lower Timing Chain Cover ] See: Timing Cover/Service and Repair/Lower Timing Chain Cover.
-
Remove camshaft timing chains from camshafts. Refer to => [ Camshaft Timing Chains ] See: Camshaft Timing Chains.
-
Remove power take-off drive chain. Refer to: Vehicles up to 04.2006 => [ Power Take-Off Drive Chain, through 04.06 ] , vehicle from 04.2006
=> [ Power Take-Off Drive Chain, from 05.06 ] See: Cylinder Block Assembly/Accessory Drive/Service and Repair/Power Take-Off Drive Chain,
From 05.06.
-
Push drive chain tensioner guide rail in direction of - arrow - and secure chain tensioner using securing pin (T40071).
-
Mark running direction of timing chain with paint.
-
Remove bolts - 2 - and - 3 - and remove chain sprockets with drive chain and glide track - 1 -.
Installing
Installation is in reverse order of removal, noting the following:
‹› Secure crankshaft - 1 - in TDC position using crankshaft holder (T40069).
-
First, install left camshaft timing chain sprocket - 2 -.
