A4 Sedan V6-3.2L (BKH) (2007)
Headlamp Alignment Control Module: Service and Repair
Headlamp Range Control Module J431, Removing and Installing
Headlamp Range Control Module J431 , Removing And Installing
Removing
-
Location: at instrument panel carrier behind glove box
-
Remove glove box.
-
Disconnect electrical connection - arrow - .
-
Remove screws - 1 - and - 2 - and remove module.
Installing
Install in reverse order of removal.
Tightening torque
Control module to body - screw : 3 Nm