A4 Sedan V6-3.2L (BKH) (2007)
/Page-705003.png)
-
Fill transmission with 5 Liter ATF.
-
Selector lever in "P", start engine and let it run at idle.
CAUTION!
Let engine run at high speed at "2500 - -3000 RPM" for approximately 4 to 5 seconds immediately after starting.
Running the engine at high speeds is necessary so that the ATF pump is bled after a transmission repair.
If running at high speeds is not performed, the transmission can be damaged.
-
Start engine
-
By pressing the gas pedal, run engine at high speed at "2500 - 3000 RPM" for approximately 5 seconds.
-
Press brake pedal and hold.
-
Shift through all selector lever positions "P, R, N, D, S " and let each position remain shifted at idle for approximately 2 seconds.
-
Selector lever in "P" and let engine continue to run at idle.
-
Thread connection on shut-off valve of ATF filler system F/CVT transmission (VAS 5162) from ATF inspection plug opening- B -.
