A4 Sedan V6-3.2L (BKH) (2007)
/Page-1250002.png)
Checking internal resistance
-
Using a Multimeter, check the Intake Manifold Runner Control (IMRC) Valve (N316) terminals 1 to 2 for resistance
Specified value: around 30 ohms.
If the specified value was not obtained:
-
Replace the Intake Manifold Runner Control (IMRC) Valve (N316).
If the specified value was obtained:
Checking voltage
Switch the ignition on.
-
Using a Multimeter, check the Intake Manifold Runner Control (IMRC) Valve (N316) electrical harness connector terminal 1 to ground (GND)
for voltage.
