A4 Sedan V6-3.2L (BKH) (2007)
/Page-262002.png)
-
Use Special Screwdriver T8 T40056 to remove screws - 4 - and - 5 - .
-
Remove hex socket head bolt - 6 - .
-
Release trim cover - 1 - on upper steering column trim - 2 - using a small screwdriver - arrows A and B - .
-
Separate upper trim - 2 - from lower trim - 3 - and remove upper trim.
-
Remove release lever for steering column adjustment - 7 - and guide out lower trim.
-
Remove screw - 2 - .
CAUTION: Before disconnecting electrical connections at module, discharge any static electricity by briefly grasping hold of door
striker plate or similar, grounded article on vehicle.
-
Disconnect electrical connections - 1 - and - 3 - .
-
Disconnect electrical connection - 4 - .
-
Disengage connector lock - 1 - in direction of - arrow - in order to release connector - 2 - .
-
Carefully remove steering column switch module.
Installing
Install in reverse order of removal, noting the following:
