audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

Customer Interest for Control Module:|370715|Page 786 > < Tire Pressure Monitor Receiver / Transponder|Diagrams
Page 1
background image

Control Module: Customer Interest
A/T Controls - MIL ON/DTC P0706/P1793/P0722

37 07 15 

2012154/10 

Oct. 10, 2007

Supersedes Technical Service Bulletin Group 37 number 07-11 dated June
22, 2007 to add a DTC code necessary because of a change in the diagnostic tool software.

Vehicle Information

MIL on, and/or Multitronic Transmission in Emergency Running Mode (DTC P0706, P1793, or P0722 in TCM)

Condition

^

MIL on and/or vehicle in emergency running mode with gear indicator illumination inverted.

^

DTC 17090-P0706 (Transm. Range Sensor Circ. Range/Performance), 18201-P0722 (Output Speed Sensor 2 Circ. No Signal) or DTC 18201-P1793
(Output Speed Sensor 2 Circ. No Signal).

Technical Background

Not applicable.

Production Solution

Not applicable.

Service

It is not necessary to receive an authorization number from the Technical Assistance Center for the repair described in this bulletin.

1.

Attach VAS scan tool printouts to the repair order. Warranty requested documents received without VAS scan tool printouts will be denied
payment.

2.

If DTC 17090-P0706, 18201-P0722 or 18201-P1793 is stored in the fault memory, replace Transmission Control Module.

Refer to Group 38, Transmission Control Module (TCM) J217 Removing and Installing.

Warranty

Customer Interest for Control Module:|370715|Page 786 > < Tire Pressure Monitor Receiver / Transponder|Diagrams