A4 Sedan V6-3.2L (BKH) (2007)
-
Ensure that the wiring harness - 5 - runs between seat frame and plastic guide - 7 - and that no tension is applied to the cable.
-
Secure clip - 6 -.
-
Switch on ignition.
CAUTION!
No one should be in vehicle when connecting battery.
-
Connect the battery ground (GND) strap.
‹› Follow safety measures after connecting battery.
‹› If the Airbag Malfunction Indicator Lamp (MIL) ( K75) shows a malfunction after assembly, DTC memory must be checked with Vehicle
Diagnostic, Testing and Information System ( VAS 5051 A), cleared and then rechecked.
2
Nuts (Qty. 2)
‹› Tightening specification 5 Nm
‹› replace after each disassembly
3
Metal Tab
4
Boot
5
Wiring Harness
6
Clip
7
Plastic Guide