A4 Sedan V6-3.2L (BKH) (2007)
1
Airbag Control Module
‹› Removal:
-
Disconnect the battery ground (GND) strap.
-
Remove center console => [ Center Console, through October 2004 ] See: Body and Frame/Interior Moulding / Trim/Utility Storage
Compartment/Service and Repair/Storage Compartments and Covers.
-
Position securing clip - 4 - on connector - 3 -.
-
Remove connector - 3 - from control module - 1 -.
-
Remove bolts - 2 - (Qty. 3).
-
Remove control module.
‹› Installing:
To install, perform the steps used in removal in reverse order.
‹› Follow safety measures after connecting battery.
‹› If the Airbag Malfunction Indicator Lamp (MIL) ( K75) shows a malfunction after assembly, DTC memory must be checked with Vehicle
Diagnostic, Testing and Information System ( VAS 5051 A), cleared and then rechecked.
‹› After replacing control module, it must be coded.
See Guided Fault Finding.