A4 Sedan V6-3.2L (BKH) (2007)
Steering Mounted Controls Communication Module: Service and Repair
Steering Column Electronics Systems Control Module J527, Removing and Installing
Steering Column Electronics Systems Control Module J527 , Removing And Installing
Removing
NOTE: Should the Steering Column Electronic Systems Control Module J527 require replacement, follow applicable component "Replacement"
procedure using VAS 5051/5051 in operating mode "Guided Fault Finding" .
-
Remove steering column switch module.
CAUTION:
-
Ensure steering is in straight ahead and centered prior to removing spiral spring.
-
Position of spiral spring must not be changed once removed.
-
Carefully release clip fasteners - arrows - and remove spiral spring - 1 - from steering column switch module.
-
Remove Steering Angle Sensor G85 - 1 - from Steering Column Electronic Systems Control Module J527 in direction of - arrow - .
-
Remove screws - arrows - .
-
Remove Steering Column Electronics Systems Control Module J527 - 1 - from steering column switch module.
Installing
Install in reverse order of removal, noting the following: