A4 Sedan V6-3.2L (BKH) (2007)
/Page-3257006.png)
-
Install both upper links joint pins in wheel bearing housing, by pressing down as far as possible by clamping using special tool T40067.
-
Install and tighten new bolt - 1 - and self-locking nut.
-
Install ABS speed sensor.
-
Install and secure brake disc.
-
Install wheels and tighten.
CAUTION!
Tighten hex bolt for drive axle (only when vehicle is standing on its wheels - risk of accident-).
-
Perform wheel alignment.
Wheel alignment must be performed on wheel alignment equipment recommended by VW/Audi.
