A4 Sedan V6-3.2L (BKH) (2007)
/Page-1756008.png)
-
Remove all adjustment discs, lining discs, outer discs and the corrugated spring washer - 5 -, - 4 -, - 3 -, - 2 - and - 1 - from input shaft cylinder -
A -.
CAUTION!
This step is necessary because the corrugated spring washer - 2 - is only installed over the lower adjustment disc - 1 - in order to adjust the
input shaft. When assembling the input shaft, the corrugated spring washer is installed in the upper position.
-
Assemble input shaft => [ Input shaft, assembling ] See: Service and Repair/Overhaul/01J,0AN Continuously Variable Transmission/Input Shaft
With 7 Lining Discs.
