A4 Sedan V6-3.2L (BKH) (2007)
/Page-1758006.png)
-
Measure shim with digital depth gauge (VAS 6087 ) on upper running surface and note measurement - A -.
-
Measure with digital depth gauge (VAS 6087) on lower running surface and note measurement - B -.
-
Subtract value of both measurements "B - A" to determine distance "D" of both running surfaces to thrust plate.
Thrust plate distance calculation "D": "B - A = D"
-
Repeat measurement on 2 additional places on thrust plate off set at 120 degrees.
-
Using these three measurements, calculate thrust plate average M D.
Average: "(Value 1 + Value 2 + Value 3) : 3 = MD"
Determining Air Play
-
Determine air gap on the basis of the following calculations:
Air gap = "MD" - "MK"
Air gap specified value: 1.4 ± 0.2 mm.
If specified value is not obtained:
