Audi Workshop Service and Repair Manuals

Input Shaft: Overhaul
Input Shaft With 6 Lining Discs Assembly Overview

Input Shaft with 6 Lining Discs Assembly Overview

CAUTION!
‹› Note the difference between input shafts with 6 and 7 lining discs => [ Input Shaft, Servicing with 6 Lining Discs ] See: 01J,0AN

Transmission/Input Shaft, Servicing With 6 Lining Discs.

1

Input shaft seal

‹› Replace => [ Input Shaft Seal ] See: Continuously Variable Transmission/Transaxle/Seals and Gaskets/Service and Repair/Overhaul

2

Input shaft cover circlip

‹› Replace with same thickness

3

Input shaft cover

‹› After removing the cover, the input shaft cover bearing " A" (transmission input shaft ball bearing) must be replaced => [ Bearing A in Input

Shaft Cover ] See: Removal and Replacement/01J,0AN Continuously Variable Transmission/Bearing A in Input Shaft Cover

4

Piston

‹› Check for wear.

5

Pressure plate

‹› Check for wear.