Audi Workshop Service and Repair Manuals

Input Shaft: Removal and Replacement
Input Shaft With 6 Lining Discs Assembly Overview

Input Shaft with 6 Lining Discs Assembly Overview

CAUTION!
‹› Note the difference between input shafts with 6 and 7 lining discs. Refer to => [ General Information ] See: Continuously Variable

Transmission/Transaxle/Service and Repair/Procedures/01J Transmission/General Information.

1

Input shaft seal

‹› Replacing, Refer to => [ Input Shaft Seal ] See: Continuously Variable Transmission/Transaxle/Seals and Gaskets/Service and

Repair/Removal and Replacement/01J Transmission/Input Shaft Seal.

2

Input shaft cover circlip

‹› Replace with same thickness.

3

Input shaft cover

‹› After removing cover, input shaft cover ball bearing must be replaced. Refer to => [ Input Shaft Cover Ball Bearing ] See: Input Shaft Cover

Ball Bearing.

4

Piston

‹› Check for wear, refer to => [ Input Shaft Checking for Wear ] See: Testing and Inspection.

5

Pressure plate